Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cigarette Lighter Fuse on the Fiat 600

Model: Fiat Seicento MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Cigarette lighter

Video tutorial

Cigarette lighter sockets are increasingly used as power sources for small electronic devices, but using low-quality components can cause surges, leading to the fuse blowing. If you need to replace it, gather a replacement fuse, a flat-head screwdriver, and a diagram to locate the relevant fuse.

Open the fuse box using the screwdriver and refer to the diagram printed on the cover to locate fuse number 24, rated at 25A, which protects both the cigarette lighter and the electric fan. Using the tweezers provided inside, remove the old fuse and insert the new one; close the cover and check the operation.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

Removing Cigarette Lighter Bulb from Fiat 600
Removing Cigarette Lighter Bulb from Fiat 600
Fiat Seicento (1998-2010 / MK 1) In this video, you will see how to replace the cigarette lighter bulb of the Fiat 600. First, remove the 25 Amp fuse to work safely. Start by removin…
How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
How to Remove the Headrest from a Fiat 600
How to Remove the Headrest from a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you start, sit in the back seat of your Fiat 600. In the headrest support slots, there are small holes. Begin by inserting a suitable tool int…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos