Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Fuse Box on the Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Fuse box

In this brief video tutorial, locate the internal and external fuse boxes on the Fiat 600 by following these simple steps. First, identify the two fuse boxes located in the engine bay; the first is situated behind the battery, accessed by removing the plastic cover. The second is on the right side, also accessed by removing the cover, as shown in the video. The internal fuse box is found on the driver's side, to the left of the steering wheel; remove the cover to access it, referring to the owner's manual for the fuse diagram!

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the Fuse Diagram for a Fiat 600?
What is the Fuse Diagram for a Fiat 600?
Fiat Seicento (1998-2010 / MK 1) The video attached to this review shows the fuse diagram for our Fiat 600. Fuses are electronic devices that protect the electrical devices they are …
How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
How to Top Up the Windscreen Washer Fluid of a Fiat 600
How to Top Up the Windscreen Washer Fluid of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you begin, open the front bonnet of your Fiat 600. Start by unscrewing and removing the cap located near the right front headlamp. Then, inser…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos