Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Seicento
    4. : Outside rearview mirror

Fiat Seicento - Outside rearview mirror

Fiat Seicento (1998-2010 / MK 1)
How to replace the wing mirror in a Fiat 600
In this video tutorial we can see how it is possible to replace the external rear view mirror in a Fiat 600 by following a few simple steps: the first thing to …read all…
Posted on 27 April 2023 by ScegliAuto
Fiat Seicento (1998-2010 / MK 1)
How to remove an exterior mirror on the passenger side of a Fiat 600
How to remove the mirror of our car? Simple operation, we see in this video how to disassemble an external mirror on the passenger side of a Fiat 600. Unscrew …read all…
Posted on 20 November 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (1) Shock absorbers (2) Battery (2) Coil (1) Air Vents (1) Spark plugs (4) Timing belt (4) V-belt (2) Air conditioning (1) Checks and maintenance (10) Dashboard (1) Mass air flow sensor (1) Brake discs (2) Headlight (4) Tail light (1) Fog lights (1) Air filter (2) Clutch (1) Light bulb (1) Interior lights ceiling light bulb (1) Antifreeze liquid (2) Dashboard light (2) License plate light (1) Engine (1) Window motor (1) Engine oil (2) Door panel (2) Rear bumper (4) Brake pads (1) Gear Shift Knob (2) Fuel pump (4) Door (1) Window lift button (1) Instrument cluster (2) Radiator (1) Passenger compartment heating radiator (1) Wheel (2) Fuse box (3) Seat (2) Crankshaft RPM sensor (1) Outside rearview mirror (2) Engine mount (1) Drums and shoes (2) Engine head (1) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos