Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Vent Knobs on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Air conditioning

How do you change the bulbs or LEDs for the illumination of the manual air conditioning knobs on a Fiat Panda? Follow this guide. Remove the air vent knobs by hand. Disconnect the air conditioning control frames using a screwdriver (leveraging), then extract the parts from the instrument panel as shown in the video. Be careful not to break the plastic tabs that hold the frames in place. After removing the knobs from the panel, replace the bulbs or LEDs with new ones. Finally, reassemble all the pieces in reverse order.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Dashboard Light Bulb Replacement T5
Dashboard Light Bulb Replacement T5
Fiat Panda (2003-2012 / 169, MK 2) To replace the backlighting bulbs of the instrumentation on the central console of the dashboard, simply remove the knob assembly: the knobs and thei…
Remove the Climate Control Knobs on Panda
Remove the Climate Control Knobs on Panda
Fiat Panda (2012-2026 / 319, MK 3) Remove the climate control knobs from the Fiat Panda? Remove the knobs if you need to replace them or the bulbs inside. Locate the panel with the ven…
How to Remove the Distributor from a Fiat Panda
How to Remove the Distributor from a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) How to remove the distributor from a Fiat Panda? Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation…

    Frequently Asked Questions

    • Panda 2012-2026 - How to solve air conditioning problems on Fiat Panda? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos