Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Heating Control Knobs on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Air conditioning

See other generations:
Video tutorial

How to remove the bulbs for the manual air conditioning control knobs on a Fiat Panda? In this video, see how to proceed. Disconnect the air conditioning control frames using a screwdriver (levering), then, pull the knobs from the instrument panel (as shown in the video).

Be careful not to break the plastic clips that hold the knobs. After removing the knobs from the panel, replace the illumination bulbs or LEDs with new ones.

Finally, reassemble all the parts in reverse order. Test the new illumination bulbs.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

Guide to Removing the Heating Radiator of the Fiat Panda
Guide to Removing the Heating Radiator of the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video tutorial, you will learn how to remove and replace the heating radiator of the Fiat Panda. First, get inside the vehicle and remove the…
How to Remove the Heating Fan from a Fiat Panda
How to Remove the Heating Fan from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) The heating fan in a Fiat Panda is located above the pedals. Before you can begin, you need to remove the relevant cover. Start by disconnecting the …
How to Remove the Heating Radiator from a Fiat Panda
How to Remove the Heating Radiator from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, sit in the driver's seat of your Fiat Panda. Begin by dislodging the gear lever gaiter from its housing and lifting it. Next, unscre…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos