Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the storage compartment of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Dashboard

In this new guide of ours, we will discover together the necessary steps to easily disassemble the glove compartment located on the passenger side of your Fiat 500. First of all, make sure the car is turned off, then open the glove compartment and use a Phillips screwdriver to unscrew all the various screws holding the compartment in place. After unscrewing all the screws, pull the entire compartment towards you until it is completely disassembled. The procedure is now successfully completed and you can proceed with a possible replacement of the glove compartment of your Fiat 500.

Posted on 5 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Glove Compartment on a Fiat 500
How to Remove the Glove Compartment on a Fiat 500
Fiat 500 (2014-2022 / 500 X) You can remove the glove compartment on this car independently by following our guide. First, to remove the door, you will need to unlock part of the…
How to Remove the Dashboard from a Fiat 500?
Fiat 500 (2007-2021 / ) To remove the dashboard from a Fiat 500, first loosen the screws at the back of the steering wheel so that the front airbag can be removed, along wit…
How to Remove the Exhaust Manifolds from a Fiat 500
How to Remove the Exhaust Manifolds from a Fiat 500
Fiat 500 (1957-1975 / Epoca) Before you begin, open the rear engine bonnet of your Fiat 500. This operation should be performed when the engine is cold. Start by loosening the fo…

    Frequently Asked Questions

    • 500 2007-2024 - How much does it cost to replace the dashboard dashboard of the FIAT 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos