Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the factory settings of the multimedia system of the Fiat Fullback

Model: Fiat Fullback MK 1 - Years 2015-2018
Part: Checks and maintenance

In this short guide, we will see the instructions that will allow us to reset the factory settings of the multimedia system of the Fiat Fullback. First of all, we get on board the vehicle and start the dashboard; then we go to the settings menu and press the arrow to go to the second page, then press on the reset option, as shown in the video. At this point, we confirm the reset choice and wait a few minutes for the multimedia system to be completely restored; we turn off and on the dashboard, checking the operation of the multimedia system!

Posted on 8 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the system language of the Fiat Fullback
How to change the system language of the Fiat Fullback
Fiat Fullback (2015-2018 / MK 1) In order to change the system language of your Fiat Fullback, all you need to do is carefully read the following guide and follow the steps described…
Where is the fuse box located in the cabin of the Fiat Fullback?
Where is the fuse box located in the cabin of the Fiat Fullback?
Fiat Fullback (2015-2018 / MK 1) In the following guide, we will discover where the box containing all the various fuses of your Fiat Fullback is located. The entire procedure takes …
Where is the fuse box of the 2019 Fiat Fullback located?
Where is the fuse box of the 2019 Fiat Fullback located?
Fiat Fullback (2015-2018 / MK 1) The 2019 Fiat Fullback has two fuse boxes inside. The first fuse box is located in the engine compartment, near the battery. Inside are fuses for the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos