Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove an External Wing Mirror from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Side mirror

See other generations:
Video tutorial

How do you remove the mirror from your car? In this video, learn how to remove an external wing mirror from a Fiat Panda. Detach the mirror adjustment lever by hand, then unscrew the securing bolt.

Use a lever to remove the internal trim part of the mirror (there are plastic clips). Once the trim piece is removed, unscrew the central securing bolt of the mirror.

Remove the mirror with the glass adjustment cables from the car door. To reassemble: fit the mirror with the bolt, the adjustment cables, and the plastic trim back into the door panel.

Finally, test the mirror's correct operation.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Remove the External Wing Mirror on a Fiat Panda
How to Remove the External Wing Mirror on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Open the front door of your Fiat Panda. Begin by unclipping and removing the internal cover near the wing mirror. Next, unscrew and remove the nut th…
How to Replace the External Wing Mirror on a Fiat Panda
How to Replace the External Wing Mirror on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this brief guide, you will learn how to remove and replace the external wing mirror on a Fiat Panda. First, open the driver's side front door and …
How to Remove the External Rear-View Mirror from a Fiat Panda
How to Remove the External Rear-View Mirror from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you begin, open the front door of your Fiat Panda. Using a thin but sturdy tool as a lever, start by prying off and removing the internal cove…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos