Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heating control bulbs of the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Dashboard

This is a simple operation without too many complications. No special tools are required. To lift the panel where the knobs are located, simply pull the panel from the two outer edges, then pull the knobs step by step. This way, you gain access to the slots for the micro bulbs. Remove them and compare them to ensure they are the same. Install the new bulbs and check their operation. Now, retrace the steps described in reverse for reassembly of the various components.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Heating Controls on Fiat Panda 2
How to Remove the Heating Controls on Fiat Panda 2
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, learn how to remove the heating or air conditioning controls on a second-generation Fiat Panda, following the instructions be…
Removing the Heating Control Knobs on a Fiat Panda
Removing the Heating Control Knobs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the bulbs for the manual air conditioning control knobs on a Fiat Panda? In this video, see how to proceed. Disconnect the air conditio…
Guide to Replacing the Heating Radiator in the Fiat Panda
Guide to Replacing the Heating Radiator in the Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Today's guide shows you the steps to remove and replace the heating radiator in the Fiat Panda. First, open the bonnet and start by removing the batt…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos