Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Headlight Bulbs on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Headlight bulb

Video tutorial on how to replace the front headlight bulbs on a Fiat 500. Let's see how to proceed in the instructional video. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection caps for the headlights (located at the rear of the headlights) and remove them. At this point, you will find the bulbs with metal clips. Pull the bulb holders out of the headlight and extract the damaged bulb with the help of a screwdriver. In this case, install the LEDs (modifying the power supply to the connectors) and insert the bulb holder back into the headlight housing. Finally, close the headlight with the inspection cap. Test the correct functioning of the lights.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Headlight Bulbs on a Fiat 500
Removing the Front Headlight Bulbs on a Fiat 500
Fiat 500 (2007-2021 / 312) Are the headlight bulbs blown? Let's see how to remove the front headlight bulbs with access through the wheel arch liner. Use a suitable screwdriver…
Replacing Headlight Bulbs on a Fiat 500
Replacing Headlight Bulbs on a Fiat 500
Fiat 500 (2007-2024 / 312) Are the bulbs blown and unsure how to replace them? Here’s how to remove them on a Fiat 500. Use a screwdriver to take off the plastic cover at the b…
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos