Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the gear knob of the Fiat 500 2016

Model: Fiat 500 312 - Years 2007-2024
Part: Shift knob

If you want to disassemble the gear knob of your Fiat 500 (2016) by yourself, just follow the steps described in this new guide. First of all, get a small flat-head screwdriver and a 10mm wrench. Then, enter the car and make sure it is turned off. Use the flat-head screwdriver to remove the top part of the knob, then use the 10mm wrench to unscrew the bolt and complete the removal of the gear knob. To install a new one, just follow the same procedure in reverse order.

Posted on 4 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2024 / 312) Below we will see the instructions that will allow us to disassemble and replace the gear knob of the Fiat 500, in simple steps. First of all, we cli…
Fiat 500 (2007-2021 / 312) Before you begin, sit in the driver's seat of your Fiat 500. Start by prising off the top cover of the gear knob using a flat screwdriver. Next, unsc…
Fiat 500 (2007-2024 / 312) In this tutorial, you will see how to disassemble and replace the gear knob and gaiter of a Fiat 500 and an Abarth 595. First, get inside the vehicle…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos