Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Knob on a Fiat 500 Abarth

Model: Fiat 500 - Years 2007-2021
Part: Shift knob

In this video tutorial, you will learn how to remove and replace the gear knob and gaiter on the Fiat 500 Abarth, following the instructions below. First, get inside the vehicle and start by removing the small plastic cap at the top of the knob; use a socket spanner with an extension to unscrew and remove the screw of the knob, as shown in the video. Next, unclip the gaiter from the sides and pull the knob upwards to remove it; replace it with the new one and reassemble everything by following the reverse procedure!

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Gear Shift Lever on the Fiat 500 Abarth
Removing the Gear Shift Lever on the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In this video tutorial, you will learn how to remove and replace the gear shift lever and the housing on the Fiat 500 Abarth, following the instructi…
How to replace the gear knob of the Fiat 500 Abarth
How to replace the gear knob of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Today's main instructions will show us the process of disassembling and replacing the gear shift knob of the Fiat 500 Abarth and Fiat 500. First, we …
Replacing the Gear Knob on a Fiat 500 Abarth
Replacing the Gear Knob on a Fiat 500 Abarth
Fiat 500 (2014-2022 / 500 X) For replacing the gear knob on the Fiat 500 Abarth, position the car securely and stably. This precaution should be taken whenever performing mainten…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos