Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the brake light bulb of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Tail light bulb

In this new guide aimed at all of you who own a Fiat 500, we will discover the steps you need to follow to complete the replacement of the brake light bulb. First of all, make sure you have completely turned off the car, then lift the rear hood and unscrew the screws that hold the headlight in place with a specific key. Once this simple operation is completed, pull the headlight outwards without damaging it and remove the bulb holder. Finally, proceed with the replacement of the faulty brake light bulb with a new one that is perfectly compatible.

Posted on 21 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the brake light bulb of the Fiat 500
How to replace the brake light bulb of the Fiat 500
Fiat 500 (2007-2024 / 312) In this new guide dedicated to all of you who own the new Fiat 500, we will discover the steps you need to take if you want to replace the brake ligh…
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
How to Replace the Fog Light Bulb on a Fiat 500 X
How to Replace the Fog Light Bulb on a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Replacing the fog light bulb on a Fiat 500 X is a very simple task that can be done independently. Start by removing the wheel arch liner on the side…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos