Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Fiat Ducato?

Model: Fiat Ducato MK 2 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Service warning light

See other generations:
Video tutorial

To completely remove the Service light from the instrument panel of the Fiat Ducato, you need to turn on the panel by inserting the ignition key into the corresponding slot and turning it: once the panel is turned on, you must hold down the button on its right side for about ten seconds.

This will display the message "CFG" on the screen, and when this appears, you must release the button; then you can hold it down again for about ten seconds, so that you can make the Service light disappear and turn off the instrument panel.


Posted on 1 January 2025 by ScegliAuto


Related tutorials

Reset the Service Light on a Fiat Ducato
Reset the Service Light on a Fiat Ducato
Fiat Ducato (1981-1993 / MK 1) Hello! Today, you will learn how to reset the service light on a Fiat Ducato. Remember, this step should only be performed after completing the servi…
How to Reset the Service Light on the Fiat Ducato
Fiat Ducato (2014-2026 / X290) To reset the Service light on the Fiat Ducato, you need to connect a diagnostic tool to the vehicle's OBD port: this port is located on the dashboard…
How to Reset the Service Light on a Fiat Ducato?
How to Reset the Service Light on a Fiat Ducato?
Fiat Ducato (2014-2026 / X290) To reset the Service light on a Fiat Ducato, turn the key in the ignition to activate the dashboard, ensuring the maintenance light illuminates. Next…

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos