Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the sun visor of the Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Checks and maintenance

Repairing the sun visor of the Fiat Panda model 169 is a very simple operation to perform independently. To carry out this operation, we need a fairly long screw. We start the repair by unhooking the sun visor from the car and then remove any remnants of broken plastic where the sun visor arm is located. Insert the screw, without the top part, into the hole at the base and insert the mobile part of the sun visor. Once attached together, you can reassemble the sun visor on the car and test its opening and closing before hitting the road.

Posted on 12 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Thermostat on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video outlines all the necessary steps to replace the thermostat on a Fiat Panda 169, including how to replace the temperature sensor. By follow…
How to Replace the Drive Shaft on a Fiat Panda 169 4x4
How to Replace the Drive Shaft on a Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Discover in this video the instructions for replacing the drive shaft on a Fiat Panda 169 4x4. First, lift the vehicle and position the jack under th…
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Let’s discover the procedure to perform routine maintenance by replacing the engine oil and oil filter on the Fiat Panda 169 4x4. First, lift the veh…

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the outside temperature sensor on the Fiat Panda located? Read answer
    • Panda 2003-2012 - What causes the power steering problem on the Fiat Panda? Read answer
    • Panda 2003-2012 - How to adjust the headlights in the Fiat Panda? Read answer
    • Panda 2012-2021 - What is the tightening torque of the rear wheel hub nut of the Fiat Panda? Read answer
    • Panda 2012-2021 - How many liters of fuel does the Fiat Panda have in reserve? Read answer
    • Panda 2003-2012 - Where is the oil pressure sensor located in the Fiat Panda? Read answer
    • Panda 2012-2026 - How to fold back seats in the Fiat Panda? Read answer
    • Panda 2012-2026 - How many km can the Fiat Panda travel in reserve? Read answer

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos