Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Sun Visor on the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the sun visor on the Fiat Panda, following the instructions below. First, get into the vehicle and start by unfastening the sun visor on the right side; then use a cross-head screwdriver to unscrew the fixing screw of the bracket, allowing you to completely remove the sun visor, as shown in the video.

At this point, replace the sun visor with the new one of the correct type; install it in the correct orientation and secure it with its screw, applying the reverse procedure!


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Sun Visor of a Fiat Panda
How to Remove and Replace the Sun Visor of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video, we will see how to remove and replace the sun visor of a Fiat Panda. This operation is very easy if you follow the correct steps. Firs…
How to Remove the External Rear-View Mirror from a Fiat Panda
How to Remove the External Rear-View Mirror from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you begin, open the front door of your Fiat Panda. Using a thin but sturdy tool as a lever, start by prying off and removing the internal cove…
How to Remove the Door Panel of a Fiat Panda
How to Remove the Door Panel of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Start by opening the door of your Fiat Panda. Next, unclip and remove the covers located near the internal door handle. Once done, unscrew and remove…

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the fuel filter located on the Fiat Panda 1.2 169? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos