Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Sun Visor of a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Door trim panel

In this video, we will see how to remove and replace the sun visor of a Fiat Panda. This operation is very easy if you follow the correct steps. First, unscrew the fastening screws of the lever mounts using a screwdriver. Take the sun visor and screw in the left mount as shown in the video. Once the left mount is secured, proceed to screw in the right mount using the screwdriver. Finally, attach the sun visor to the plastic hook on the right and remove the protective film from the interior mirror. Test the correct functioning of the installed part.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removal and Replacement of the Sun Visor on the Fiat Panda
Removal and Replacement of the Sun Visor on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you will learn how to remove and replace the sun visor on the Fiat Panda, following the instructions below. First, get into t…
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda to access the engine bay. Begin by unfastening the clips that secure the air filter cover. T…
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda to gain access to the engine bay. Begin by unfastening the securing clips of the air filter cover…

    Frequently Asked Questions

    • Panda 1980-2003 - How do you remove the internal door panel on the FIAT Panda 141? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos