Do it yourself
| ||||
|
Fiat Punto - Video tutorial
Model: Fiat Punto
188, MK 2
- Years 1999-2011 Let's see carefully how to remove the front shock absorber on a Fiat Punto? The first step to follow: we loosen the pins of the rim, lift the car on a column bridge and take off the wheel. Unscrew the locking pins of the shock absorber to the wheel hub with a socket wrench (remove the brake circuit tubes with a screwdriver). Now lower the car with the column bridge and unscrew the pins on the side (upper part of the shock absorber), remove the shock absorber from its housing. Let's compare the old piece with the new one and get ready to assemble the shock absorber to the spring with a special compression machine. Once everything is assembled, we move on to the assembly of the shock absorber on the car by proceeding backwards.
Posted on 16 October 2023 by ScegliAuto
How do you replace the front shock absorber on a Fiat Punto Evo?
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In order to replace the front shock absorber of the Fiat Punto Evo you have to go and open the bonnet, so that you can detach the cover at the base o
Fiat Punto front shock absorber replacement
Fiat Punto (1999-2011 / 188, MK 2) In this video tutorial we will see how to remove and replace the front shock absorber of a Fiat Punto. First we then go to disassemble the front whee
How do you replace the front shock absorbers on the Fiat Grande Punto?
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In order to replace the front shock absorbers on the Fiat Grande Punto it is necessary to remove the wipers and the grille under the windscreen: this Other guides that may interest you |
Frequently Asked QuestionsHow do you replace the horn on the Citroà «n Berlingo?In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.039
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |