Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Shock Absorber from a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Shocks

How to remove the rear shock absorber from a Fiat Grande Punto? The first step: lift the bonnet and secure it. Use a socket spanner to unscrew the securing pins of the shock absorber. Lift the car on a column lift and remove the front wheel. Use a socket spanner to unscrew the securing pins of the shock absorber at the wheel hub (detach the brake line tubes with a screwdriver). Unscrew the pins on the side and remove the shock absorber from its housing (place a support under the bar). Compare the old part with the new one and prepare for installation. Fit the new shock absorber onto the car, proceeding in reverse order.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Shock Absorber on a Fiat Grande Punto
How to Remove the Rear Shock Absorber on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the rear shock absorber on a Fiat Grande Punto? Follow these steps: loosen the wheel nuts, lift the car on a column lift, and remove th…
How to Remove the Rear Shock Absorber on a Fiat Punto
How to Remove the Rear Shock Absorber on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Let's see how to remove the rear shock absorber on a Fiat Punto. The first step: loosen the wheel nuts, lift the car on a column lift, and remove the…
How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto
How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to disassemble and replace the rear light of the Fiat Punto Evo, as well as the Grande Punto. First, open …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos