Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shock Absorbers on the Fiat Grande Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Suspension system

See other generations:
Video tutorial

To replace the front shock absorbers on the Fiat Grande Punto, you need to remove the wipers and the grille located under the windscreen: this will provide clear access to the shock absorber shaft. Next, remove the wheels, and in the case of the left side, disconnect the brake wear sensor.

To remove the bolts securing the shock absorber, it is advisable to use some penetrating oil to simplify the task. Use 17mm and 18mm spanners to remove the bolts both at the bottom and at the top, accessible from the engine bay. Once the first shock absorber is removed, the procedure for removing the second will be similar.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Shock Absorbers on the Fiat Punto?
How to Replace the Rear Shock Absorbers on the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the rear shock absorbers on the Fiat Punto, lift the car using a ramp and loosen the bolts that secure the wheel at the end of the rear ax…
How to Remove the Rear Shock Absorber from a Fiat Grande Punto
How to Remove the Rear Shock Absorber from a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the rear shock absorber from a Fiat Grande Punto? The first step: lift the bonnet and secure it. Use a socket spanner to unscrew the se…
Replacing Car Shock Absorbers
Replacing Car Shock Absorbers
Fiat Punto (1999-2011 / MK 2, 188) When your car has covered many miles, it may be necessary to replace the shock absorbers, which serve to dampen the car's bumps and ensure safety whi…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos