Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the tire condition

Model: Fiat Fiat Various
Part: Tires

In this video we can see how to effectively check the condition of our tires by ourselves: first of all, we need to check the tread, which should have a depth of at least 1.6 mm. To verify this height, there are the so-called "indicators", which are these squares found inside the grooves; when the tread reaches the same level, it means that the tire needs to be changed. We can also do the test with a 2 euro coin: if it remains stuck, the tire still has enough tread. We also need to check that the tire wear is uniform: otherwise, the vehicle needs to be balanced. We also need to check that there are no tears or breaks on the tire shoulder. Finally, we will check the pressure, comparing it with the one recommended by the manufacturer, which is indicated on the label found on the driver's door frame.

Posted on 17 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on a Fiat car
How to reset the tire pressure warning light on a Fiat car
Fiat Fiat Various The steps to reset the TPMS light on a Fiat vehicle are simple and quick to perform independently, thanks to our short video tutorial. To reset the l…
How to Reset the Tyre Pressure Warning Light on the Fiat Egea?
How to Reset the Tyre Pressure Warning Light on the Fiat Egea?
Fiat Fiat Various To completely clear the tyre pressure warning light on the Fiat Egea, inflate the tyres to the optimal pressure value indicated on the sticker attach…
How to Reset the Service Light on the Fiat Egea?
How to Reset the Service Light on the Fiat Egea?
Fiat Fiat Various To reset the Service light on the Fiat Egea, connect a diagnostic tool to the vehicle's OBD port, which is located on the dashboard just below the st…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos