Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the tire of a Fiat 500X

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tires

See other generations:
Video tutorial

In this video, we will see how to change a tire on a Fiat 500X equipped with a spare wheel: we park in a safe flat area and turn on the hazard lights. All the equipment is located in the trunk, under the rear mat. We remove the latch and take out the tire; underneath we will find the jack and all the tools.

We remove the hubcap, loosen the bolts by turning them clockwise, then place the jack in the designated areas marked by triangles. We lift the vehicle by turning the jack screw clockwise, raising it just enough: we remove the wheel, position the spare tire, and lightly tighten the bolts clockwise.

We lower the vehicle by turning the jack counterclockwise. Once on the ground, we finish tightening the wheel bolts.

Now we just need to reposition the tools and the flat tire in the trunk. Remember that the spare wheel has speed and distance limitations.


Posted on 12 January 2026 by ScegliAuto


Related tutorials

How to Use the Tyre Repair Kit on a Fiat 500x
How to Use the Tyre Repair Kit on a Fiat 500x
Fiat 500 (2014-2022 / 500 X) Here’s how to correctly use the tyre repair kit on a Fiat 500x: The maintenance kit is located under the rear load floor. If you have a flat tyre, st…
How to Reset the "TPMS" Light on a Fiat 500X
How to Reset the "TPMS" Light on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Before you begin, sit in the driver's seat of your Fiat 500X. Start by selecting the vehicle settings page using the selection arrows on the steering…
Removing Front Fog Light on Fiat 500X
Removing Front Fog Light on Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this video tutorial, follow the instructions to remove the front fog light on a Fiat 500X in simple steps. To access the front fog light, you need…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos