Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Fog Light on Fiat 500X

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Fog lights

See other generations:
Video tutorial

In this video tutorial, follow the instructions to remove the front fog light on a Fiat 500X in simple steps. To access the front fog light, you need to remove the front wheel arch; for this, you can take off the wheel to gain more space and remove all the retaining clips, as shown in the video.

At this point, disconnect the electrical connector of the fog light and unscrew the retaining screws to remove the entire unit; all that’s left is to replace the bulb with a new one, applying the reverse procedure for reassembly!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Fiat 500X
How to Replace the Front Headlight Bulb on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this video, learn how to replace the position light bulbs on a Fiat 500X. Start by using a suitable screwdriver to remove the plastic cover locate…
How to Replace the Front Fog Light Bulb on a Fiat 500L
How to Replace the Front Fog Light Bulb on a Fiat 500L
Fiat 500 (2014-2022 / 500 X) Start by placing the car on two ramps to gain easier access to the fog lights. Then, unscrew and remove the two screws that secure the lower cover, a…
How to Reset the "TPMS" Light on a Fiat 500X
How to Reset the "TPMS" Light on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Before you begin, sit in the driver's seat of your Fiat 500X. Start by selecting the vehicle settings page using the selection arrows on the steering…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos