Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fan Resistor on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Blower motor

See other generations:
Video tutorial

This video shows how to remove the ventilation resistor in the cabin of a Fiat Grande Punto. The resistor is located directly under the dashboard near the fan (right side of the glove compartment).

Use a socket spanner to unscrew the securing screws on the fan cover. Once this is done, pull off the cover with the fan after disconnecting the power cables.

Clean the fan (disassemble the fan and its parts). Remove the resistor from its housing.

Finally, reassemble the previously removed fan and all its components under the glove compartment. Test the correct operation.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

Replacing the Heater Fan Resistor on Fiat Grande Punto
Replacing the Heater Fan Resistor on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Want to remove the heater fan resistor on a Fiat Grande Punto? Let's see how to disassemble the fan resistor. Remove the plastic cover from under the…
How to Replace the Cabin Fan Resistor of a Fiat Grande Punto
How to Replace the Cabin Fan Resistor of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Below we will see the procedure to remove and replace the cabin fan resistor of a Fiat Grande Punto. First, get inside the vehicle on the front passe…
How to Replace the Fan Resistor on a Fiat Grande Punto
How to Replace the Fan Resistor on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to replace the fan resistor on a Fiat Grande Punto? Here’s how to carry out the replacement. Use a lever to remove the plastic under the front wi…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos