Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the license plate light in the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: License plate light

The light mentioned above is shown in the video available to us, it is the classic screw-in bulb used for most car license plates. Replacing it is very simple, you just need a small flathead screwdriver and you can proceed: For convenience, we open the rear hatch and once inserted into the small black light above the license plate, the screwdriver is turned, we pry and remove the cover. Now we can grab the bulb and remove it, inserting the replacement one. Let's try turning on the car lights and make sure the new one works, then reassemble everything.

Posted on 31 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Number Plate Bulb on a Fiat 500
How to Change the Number Plate Bulb on a Fiat 500
Fiat 500 (2007-2024 / 312) In this video, we will see how to change the number plate bulbs on a Fiat 500. Use a screwdriver to remove the number plate light located in the rear…
How to Replace the Number Plate Bulb on a Fiat 500 Abarth?
How to Replace the Number Plate Bulb on a Fiat 500 Abarth?
Fiat 500 (2007-2021 / ) To replace the number plate bulb on a Fiat 500, use a lever tool, such as a flathead screwdriver, to remove the light unit located directly above the…
How to Replace the Number Plate Bulb on a Fiat 500?
How to Replace the Number Plate Bulb on a Fiat 500?
Fiat 500 (2007-2022 / ) To replace the number plate bulb on a Fiat 500, use a tool like a screwdriver to pry off the plastic cover of the light unit. Once removed, you can p…

    Frequently Asked Questions

    • 500 2007-2024 - Why is the license plate light on the Fiat 500 not working? Read answer
    • 500 2007-2024 - How to replace the license plate lights in the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos