Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change a Tyre on a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Wheel

Learn how to change a tyre (punctured, damaged, etc.) on a Fiat Grande Punto. Open the boot and take out the wheel removal kit, which includes: jack, jack lever, screwdriver, wheel nut key, and telescopic key. Position the jack under the vehicle's jacking point, which is the stiffest part of the chassis to avoid bending the metal due to excessive weight, lift the car slightly, and loosen the wheel nuts. Now raise the car with the jack lever, unscrew the nuts, and pull the wheel off the hub. Fit the new rim onto the hub (the spare wheel is located under the vehicle body; bring it to the ground using the handy kit in the boot) with the respective nuts.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Car Radio on a Fiat Grande Punto?
How to Change the Car Radio on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, learn how to remove the car radio from a Fiat Grande Punto (199). This operation is really simple; you just need to have the radio release key…
How to Change the Key Battery of a Fiat Grande Punto
How to Change the Key Battery of a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this brief tutorial, you will learn how to change the remote battery of a Fiat Grande Punto. Start the procedure by releasing the ignition key fro…
Remove Key for Fiat Grande Punto
Remove Key for Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Is the battery in the Fiat Grande Punto key due for a change? Here’s how to replace it. Take your ignition key and use a screwdriver to unscrew the r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos