Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to disassemble the light switch of a fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Steering wheel
Operation: How to disassemble the light switch of a fiat 500

How to disassemble the light switch of a fiat 500? Let's see how to proceed with the disassembly: before disassembling the car steering wheel, disconnect the cables from the battery power supply. Using a screwdriver and suitable insert, unscrew the plastic covering the steering wheel, then remove the airbag by unscrewing the screws present. Once the airbag has been removed, we disconnect the power supply terminals, immediately afterwards we unscrew the central torx pin of the steering wheel and disconnect the power supply terminals. We extract the steering wheel with our hands after having marked the tightening position with a felt-tip pen. We extract the light switch from the steering rod.


Posted on 22 October 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How do you unlock the steering wheel of the Fiat 500? Read Answer
    • 500 2007-2022 - What problems with the power steering on the Fiat 500? Read Answer
    • 500 2007-2022 - What problems could the power steering of the Fiat 500 1.2 present? Read Answer
    • 500 2014-2022 - What to do when the steering of the Fiat 500 is locked? Read Answer
    • 500 2007-2022 - How to adjust the position of the steering wheel on the Fiat 500? Read Answer
    • 500 2014-2022 - What to do if the horn of the Fiat 500 X does not work? Read Answer
    • 500 2014-2022 - What is the price of the Fiat 500 steering wheel? Read Answer
    • 500 2012-2023 - Why does the steering wheel of the Fiat 500L tend to get stuck? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos