Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats from a Fiat 500

Model: Fiat 500 Epoca - Years 1957-1975
Part: Seat

Before you begin, enter the interior of your Fiat 500. Start by removing the lower seat of the rear seats by simply unhooking and pulling it out. Next, unclip the upper hook of the backrest, then lower the backrest itself. Once the backrest is lowered, unclip the lower fixing pins. After completing this last step, you can finally remove the backrest, successfully finishing the removal of the rear seats from your Fiat 500.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats from a Fiat 500
How to Remove the Rear Seats from a Fiat 500
Fiat 500 (2012-2023 / 500 L) Before you can start, open the boot of your Fiat 500 and remove the boot carpet. This will give you access to the bolts securing the rear seat backre…
Folding Rear Seats on Fiat 500
Folding Rear Seats on Fiat 500
Fiat 500 (2007-2024 / 312) Fold the rear seats of the Fiat 500 to create space in the cabin. Lower the headrests of the seats, press the button located on the backrest of the s…
Removing the Rear Seat of the Fiat 500
Removing the Rear Seat of the Fiat 500
Fiat 500 (2007-2021 / 312) Removing the rear seat of the Fiat 500? Open the boot lid and lower the seatbacks. Unscrew the securing pins located at the sides of the metal guides…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos