Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to lower the front and rear seats on the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Seat
Operation: How to lower the front and rear seats on the Fiat 500

Let's find out in this video tutorial how to lower the front and rear seats on the Fiat 500, following the instructions below. First of all, let's go up and find out how to lower the front backrest, in order to access the rear part of the car; to do this we go to lift the handle that we find on the upper part of the seat, and then recline it. To lower the rear backrests instead, we first of all open the tailgate of the boot; then let's go and pull the lever that we find on the upper part of the seat to increase the capacity of the boot!


Posted on 2 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 1957-1975 - How much do the seats of a vintage Fiat 500 cost? Read Answer
    • 500 2014-2022 - Why does the lumbar adjustment of the seat on the Fiat 500X not work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos