Do it yourself
Frequently asked questions about cars and motorcycles

How to renew the soft top of a vintage Fiat 500

Model: Fiat 500 Epoca - Years: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Part: Convertible top

See other generations:
Video tutorial

In this video we can see how to revive and renew the hood of a vintage Fiat 500 that does not have any particular damage, but is just dirty and discolored. We start by brushing it with a soft brush to remove excess dust, always brushing in a horizontal and vertical direction, never circular.

Then, with a specific product for plastic and faux leather, we spray generously and then pass - always avoiding circular motion - with a hard bristle brush. Let it sit for a few minutes and then wipe with a microfiber cloth to remove dirt; repeat several times, until the cloth remains clean.

After the hood is thoroughly dry, it will be time to apply a product to revive its color like Renovo, which can be found on comptoirducabriolet.com/it for 26.55 euros + 2.90 euros for shipping. We will also need a soft bristle brush and a container to spread it. Start from the center of the hood and work outward, remembering that the product should be applied indoors or in the shade, and if necessary, with attention and patience: if we have done a good job, a second coat may not even be necessary.


Posted on 30 March 2025 by ScegliAuto


Related tutorials

Fiat 500 (1957-1975 / Epoca) How do you remove the hood of an old-style Fiat 500? Follow this guide: using a screwdriver, remove the nut covers located at the sides of the hood, …
Fiat 500 (1957-1975 / Epoca) How to remove the roof of a classic Fiat 500? Follow these steps: use a screwdriver to remove the nut covers located at the sides of the roof (next t…
Fiat 500 (1957-1975 / Epoca) How do you remove the roof of a Fiat 500? Follow these steps. Use a screwdriver to remove the covers over the nuts on the sides of the roof, then use…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos