Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper from a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Front bumper

Is the front bumper of the Fiat Grande Punto to be replaced? Follow these steps to remove it: lift the bonnet and secure it with the provided prop. Using a battery-powered screwdriver or screwdriver, undo the securing bolts located at the top of the bumper. Once the screws at the top are undone, unscrew the bolts of the splash guards and finally remove the bolts located at the bottom of the bumper. Remove the bumper from the vehicle body by hand. To proceed with the installation: hold the bumper against the vehicle body by hand and tighten all the screws around the splash guards and around the perimeter of the bumper.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of a Fiat Grande Punto
How to Remove the Front Bumper of a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the front bumper of a Fiat Grande Punto? Let's look at the removal process. Lift the bonnet and secure it. Using a metal lever, remove …
How to disassemble the front bumper of the Fiat Grande Punto
How to disassemble the front bumper of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today's instructions will guide us through the process of disassembling and replacing the front bumper of the Fiat Grande Punto. First, we open the h…
How to Remove the Front Bumper on a Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today’s video, see how to remove the front bumper on a Fiat Punto Evo and Grande Punto by following these simple steps. First, open and lift the b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos