Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the stop light switch of the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018

These short and simple instructions will show us the process of disassembling and replacing the stop light switch of the Fiat Grande Punto, as well as the Punto Evo. After diagnosing, we will proceed to disassemble the switch; to do this, we open the front driver's side door and press the brake pedal to remove the component, disconnecting the electrical connector, as shown in the video. At this point, we will install the new original switch, making the connection and verifying its operation!

Posted on 4 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Third Brake Light on the Fiat Grande Punto
How to Replace the Third Brake Light on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, see how to replace the third brake light on the Fiat Grande Punto. Specifically, this is a fully LED unit instead of the halogen on…
Fuse Diagram for the Fiat Grande Punto 1.3 Multijet
Fuse Diagram for the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The fuse diagram for the vehicle located in the passenger compartment fuse box is as follows: 01: available; 02: Power + battery instrument cluster, …
How to Position the Logo and Third Brake Light on a Fiat Grande Punto?
How to Position the Logo and Third Brake Light on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To restore the third brake light, first retrieve the wiring from the boot gap, connect the two-pin connector correctly, and reposition the third brak…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos