Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front emblem of the Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Front bumper

See other generations:
Video tutorial

If you want to replace the emblem on the front bumper of your Fiat 500, all you need to do is carefully read the following procedure and follow all the steps described. First of all, make sure you have a new emblem that is perfectly compatible, then lift the front hood and unscrew the screws with a suitable key. Once all the screws are unscrewed, pull the front bumper slightly towards you and unscrew the screw that holds the emblem in place.

Finally, replace the old emblem with the new one and reassemble the front bumper correctly.


Posted on 8 May 2025 by ScegliAuto


Related tutorials

How to Remove and Replace the Rear Badge on the Fiat 500
How to Remove and Replace the Rear Badge on the Fiat 500
Fiat 500 (2007-2021 / 312) In this short video, you will see the instructions that will allow you to remove and replace the rear badge of the manufacturer on the Fiat 500 312. …
How to Replace the Front Badge on a Fiat 500
How to Replace the Front Badge on a Fiat 500
Fiat 500 (2007-2021 / 312) Before you can start, open the bonnet of your Fiat 500. Begin by unscrewing and removing the screws that secure the front grille of the car, then rem…
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos