Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Connect the Computer to the Socket on a Fiat Multipla

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Checks and maintenance

Want to perform maintenance on a Fiat Multipla and don't know how? This guide shows you how to connect the mini computer to reset the warning lights: open the car's access panel, sit in the driver's seat, and look under the dashboard (beneath the steering wheel) for a plastic cap (remove it); you will find the socket to connect your tester. Connect the mini PC to the connector and perform the vehicle system check. After completing all necessary checks to reset the maintenance warning light, disconnect the mini PC cable from the previously connected socket at the end of the reset.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Fiat Multipla located?
Where is the OBD port of the Fiat Multipla located?
Fiat Multipla (1998-2010 / MK 1) If you own a Fiat Multipla and want to locate the OBD port of the vehicle, all you have to do is carefully read the following guide and follow the st…
How to remove the battery of a Fiat Multipla
How to remove the battery of a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Before starting, we will have to open the front hood of our Fiat Multipla by pulling the special opening handle, positioned at the bottom left of the…
Where is it and how to reach the cigarette lighter fuse of a Fiat Multipla?
Where is it and how to reach the cigarette lighter fuse of a Fiat Multipla?
Fiat Multipla (1998-2010 / MK 1) The cigarette lighter fuse of our Fiat Multipla is located inside the fuse box. In turn, the fuse box is located inside the upper left side of the da…

Other guides you may be interested in

How to Remove the Tailgate Handle on a Nissan Qashqai

Follow these steps to remove the tailgate handle on a Nissan Qashqai to replace the number plate bulbs. First, open the rear tailgate of the car, then unscrew the screws on the plastic trim of the tailgate using a screwdriver (remove the plastic rivets). Detach the plastic trim from the tailgate, unscrew the securing bolts of the external handle with a screwdriver. Finally, remove the tailgate handle by hand. Take the new part and disassemble the number plate light. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos