Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to remove the air knobs on Fiat Qubo

Model: Fiat Qubo MK 1 - Years 2008-2019
Part: Air conditioning

How to remove the air conditioning knobs and replace the leds / bulbs on a Fiat Qubo? Let's see in this video how to proceed: unscrew the ventilation outlets above the dashboard with a screwdriver. After removing the vents, we disassemble the air conditioning control panel (unscrew the screws) and extract it from the dashboard. Let's fit the new bulbs and get ready to reassemble the knob panel. We are careful not to break the plastic tabs that block the panel. Finally, we test the bulbs previously mounted with the ignition of the instrument panel and the controls.


Posted on 26 October 2023 by ScegliAuto



Where are the fuses located in the Fiat Qubo?
Fiat Qubo (2008-2019 / MK 1) The boxes installed inside the Fiat Qubo are used to contain all the fuses that are present in the vehicle: in this type of vehicle there are two, on
Removal of Fiat Qubo seats
Fiat Qubo (2008-2019 / MK 1) In this short video guide we will see how to remove the rear seats of a Fiat Qubo; mainly we will see the basic steps. First of all, we open the rear
Where are the fuses located in the Fiat Qubo?
Fiat Qubo (2008-2019 / MK 1) Inside the Fiat Qubo, all the fuses are located in the appropriate fuse boxes that are found on the vehicle: in this type of vehicle there are two, o

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos