Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Problems that can cause worn out spark plugs on a Fiat Tipo with LPG.

Model: Fiat Tipo MK 1 - Years 1988-2000
Part: Spark plugs

As the YouTuber tells us, spark plugs on LPG cars tend to last less than those on gasoline cars, because LPG burns at higher temperatures than gasoline, and this leads to faster wear of the spark plugs. Although the actual duration may depend on various factors, it is advisable to replace the spark plugs on LPG cars every 25,000 km approximately. It is advisable to follow the manufacturer's recommendations and carry out regular checks, even though the quality of the spark plugs, the type of engine, and driving conditions certainly have their influence. Problems caused by the poor condition of the spark plugs can be: decrease in performance due to poor combustion, increase in fuel consumption, high emissions, knocking in the engine, misfires, engine overheating.

Posted on 22 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gas Filter on a Fiat Tipo
How to Replace the Gas Filter on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) As shown in the video, to replace the LPG filter on a Fiat Tipo, first obtain a new filter and remove the old one with the vehicle turned off and col…
Malfunction of the LPG Switch on a Fiat Tipo 1.4 MultiPower
Malfunction of the LPG Switch on a Fiat Tipo 1.4 MultiPower
Fiat Tipo (2016-2026 / 356, 357, 358) This video explains the possible reason for the failure to switch a Fiat Tipo 1.4 with a MultiPower engine from petrol to LPG. The system is installe…
How do you replace the glow plugs of the Fiat Tipo?
How do you replace the glow plugs of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) In order to replace the glow plugs of the Fiat Tipo, you will need to open the hood so that you can have access to the components inside the engine c…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos