Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gas Filter on a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Checks and maintenance

As shown in the video, to replace the LPG filter on a Fiat Tipo, first obtain a new filter and remove the old one with the vehicle turned off and cold. Close the valve that regulates the LPG flow (usually located in the boot). The filter is in a difficult position: it is located inside the engine compartment on the left side; you will need to unscrew and detach the pins to allow it to come out. Using a 13mm spanner, unscrew the nut located at the bottom. Disconnect the upper conductor cable and pull out the filter. The LPG filter should be replaced every 9,300 miles.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Important to know if you are installing springs in the trunk of your car
Important to know if you are installing springs in the trunk of your car
Fiat Tipo (2016-2026 / 356, 357, 358) In this video we see an important thing to know when installing new pistons - whether they are gas or spring as we can see in the footage - in the re…
How to Replace the Cabin Filter on a Fiat Tipo
How to Replace the Cabin Filter on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Replacing the cabin filter on a Fiat Tipo independently is a very simple operation, aided by our brief tutorial. The cabin filter is located inside t…
Replacing the Air Filter on the Fiat Tipo
Replacing the Air Filter on the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Follow these simple and quick steps to remove and replace the engine air filter on the Fiat Tipo. First, open the bonnet and start by loosening the c…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - The Start and Stop system no longer works on my Fiat Tipo, what could it be? Read answer

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos