Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Spark Plugs on a Fiat Tipo 1.4 95 HP 16V

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Spark plugs

The first thing to do when working on the spark plugs of a Fiat Tipo 1.4 16V 95 HP is to work on a cold engine. Then disconnect the battery and remove the airbox. Detach the hoses with the snap clips, unscrew the 10 mm screws, and remove the filter from the rubber mount. At this point, unscrew the 13 mm screw securing the wiring harness and carefully disconnect the four connectors from the coils, unlocking the yellow clips. Remove the coils with a 10 mm socket and extract them. Using a spark plug socket (with extension), unscrew the old spark plugs. Check the gap: it should be 1 mm. You can find NGK spark plugs on Amazon with the code B0CC1ZSZRR for £30.99 for a kit of 4 pieces, with free delivery. Insert the new spark plugs by hand, then tighten them to 26 Nm with a torque wrench. Reassemble the coils, the wiring (pay attention to the clips), and the airbox. Start the engine: if the idle is irregular, the throttle body will self-learn by turning the ignition off and on.

Posted on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Tipo (2016-2026 / 356, 357, 358) To replace the spark plugs on a Fiat Tipo, open the bonnet to access the components located within the engine bay: here, you will need to remove the …
Fiat Tipo (2016-2026 / 356, 357, 358) In order to replace the glow plugs of the Fiat Tipo, you will need to open the hood so that you can have access to the components inside the engine c…
Fiat Tipo (1988-2000 / MK 1) As the YouTuber tells us, spark plugs on LPG cars tend to last less than those on gasoline cars, because LPG burns at higher temperatures than gasoli…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos