Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gearbox oil on Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Transmission

This guide shows how to replace the gearbox oil on a Fiat Panda: position your car on a column lift or jack and raise it to a comfortable height for disassembly. To change the gearbox oil, you need to unscrew the bolt located under the chassis with a socket wrench as shown in the video. Once the bolt is removed, let the oil drain into a container. Prepare to re-screw the bolt on the gearbox with the wrench, then top up with the appropriate oil. Finally, test the correct operation of the gearbox (operate the gear lever).

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing the Gearbox Oil on Fiat Panda
Changing the Gearbox Oil on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) It is recommended to use a 75W-85 gearbox lubricant. Obtain a Torx key and a container to drain the gearbox oil into. Lift the vehicle with a jack, s…
Fiat Panda Gear Oil Change
Fiat Panda Gear Oil Change
Fiat Panda (2003-2012 / 169, MK 2) Changing the gearbox oil is a maintenance task that is often overlooked. However, running the gears in clean oil with optimal lubricating properties …
How to Add Gearbox Oil on a Fiat Panda 4x4 Trekking
How to Add Gearbox Oil on a Fiat Panda 4x4 Trekking
Fiat Panda (1980-2003 / 141, MK 1) This tutorial shows how to add engine gearbox oil on a Fiat Panda 4x4 Trekking. The oil to use is fairly thick SAE 80W-90. Lift the car with a hydrau…

    Frequently Asked Questions

    • Panda 2003-2012 - What to do if the gearbox is noisy in the Fiat Panda? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos