Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Gearbox Oil on Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Transmission fluid

It is recommended to use a 75W-85 gearbox lubricant. Obtain a Torx key and a container to drain the gearbox oil into. Lift the vehicle with a jack, secure it, and remove the bolt (clearly shown in the video) that acts as the plug for the gearbox. Collect the oil in the aforementioned container. Lower the vehicle by removing the jack and fill the gearbox with the previously described oil. Refit the drain hole bolt, and you are done. As you can see, this is a simple operation that anyone can do.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gearbox oil on Fiat Panda
How to replace the gearbox oil on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This guide shows how to replace the gearbox oil on a Fiat Panda: position your car on a column lift or jack and raise it to a comfortable height for …
Fiat Panda Gear Oil Change
Fiat Panda Gear Oil Change
Fiat Panda (2003-2012 / 169, MK 2) Changing the gearbox oil is a maintenance task that is often overlooked. However, running the gears in clean oil with optimal lubricating properties …
How to Add Gearbox Oil on a Fiat Panda 4x4 Trekking
How to Add Gearbox Oil on a Fiat Panda 4x4 Trekking
Fiat Panda (1980-2003 / 141, MK 1) This tutorial shows how to add engine gearbox oil on a Fiat Panda 4x4 Trekking. The oil to use is fairly thick SAE 80W-90. Lift the car with a hydrau…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos