Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing Oil on Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Oil filter

Replacing the oil on a Fiat Panda? Here’s how to do it. Position your car on a column lift or jack and raise it to a comfortable height for disassembly. To change the oil, unscrew the bolt located under the sump using a socket spanner (as shown in the video). Once the bolt is removed, let the fluid drain into a container. Prepare to refit the bolt onto the sump with the spanner. Lift the bonnet and top up the engine with the appropriate fluid. Replace the oil filter if you have reached the maximum mileage indicated.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil Replacement for Fiat Panda
Engine Oil Replacement for Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replace the oil and filter on a Fiat Panda. Start by opening the car door and pulling up the engine compartment release lever located at the bottom l…
How to Change the Transmission Oil on a Fiat Panda
How to Change the Transmission Oil on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Let's replace the transmission oil on a Fiat Panda. Position your Panda on a column lift and raise it to a comfortable height for disassembly. To cha…
How to Replace Engine Oil and Filter on a Fiat Panda
How to Replace Engine Oil and Filter on a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Today, I will show you how to change the engine oil and filter on your Fiat Panda. It is not a very complex operation; just be careful, and you can d…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos