Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Diesel fuel filter

See other generations:
Video tutorial

How to perform maintenance on a Fiat Punto? First, lift the bonnet and secure it with the prop rod; once you locate the fuel filter, disconnect it from the hoses and connection cables. Remove the filter housing from its location, then unscrew the retaining washer located at the top. Pull the filter out of the housing (clean the filter housing) and screw in the new one. Refit the filter housing in the engine bay with all its parts (hoses and power cables).

Test the correct operation of the component.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on a Fiat Punto
How to Replace the Fuel Filter on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) .. How to replace the fuel filter on a Fiat Punto. Follow this guide to proceed with the replacement. Open.. …
How to Replace the Diesel Filter on a Fiat Grande Punto
How to Replace the Diesel Filter on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replace the diesel filter on a Fiat Grande Punto: lift the car's bonnet; locate the diesel filter as shown in the video and use a large screwdriver t…
How to Replace the Air Conditioning Filter on a Fiat Punto
How to Replace the Air Conditioning Filter on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Before you can start, open the front passenger door of your Fiat Punto. Begin by unscrewing and removing the screws that secure the air conditioning …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos