Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fuel filter

See other generations:
Video tutorial

How to replace the fuel filter on a Fiat Punto. Follow this guide to proceed with the replacement.

Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Unscrew the filter housing (disconnect the cables and various hoses from the filter). Remove the fuel filter and replace it with a new one, ensuring it fits properly in the housing.

Finally, reattach the cap of the filter housing (connect the hoses and cables). Close the front bonnet.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump on a Fiat Punto
How to Replace the Fuel Pump on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) The fuel pump on the second series Fiat Punto is located under the rear seat bench. Start by removing the rear seat bench by unhooking it. This will …
How to Remove the Fuel Pump on a Fiat Punto?
How to Remove the Fuel Pump on a Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Follow the steps in the video to remove the fuel pump assembly on the Fiat Punto. Lift the rear seat and unscrew and remove the cover in front of you…
How to Change the Fuel Filter on a Fiat Grande Punto
How to Change the Fuel Filter on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Let’s see how to replace the fuel filter on a Fiat Grande Punto and Punto Evo: before starting, clean the fuel line fittings well to prevent dirt fro…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the petrol filter located in the Fiat Punto 1.2 8v? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos