Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump on a Fiat Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Fuel pump

Follow the steps in the video to remove the fuel pump assembly on the Fiat Punto. Lift the rear seat and unscrew and remove the cover in front of you by unscrewing the three cross screws. You will now see the fuel pump, from which you need to disconnect the connector, being careful of any fuel that may spill. Now unscrew the plastic ring and extract the old fuel pump assembly, taking care not to splash fuel everywhere. Now all that’s left to do is install the new fuel pump assembly, screw the plastic ring back on, and reposition the cover and seat.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on a Fiat Punto
How to Replace the Fuel Pump on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) The fuel pump on the second series Fiat Punto is located under the rear seat bench. Start by removing the rear seat bench by unhooking it. This will …
Disassembly of the fuel pump of the Fiat Punto 1.1
Disassembly of the fuel pump of the Fiat Punto 1.1
Fiat Punto (1993-1999 / MK 1, 176) In this guide, we will see the information that will allow us to disassemble and replace the fuel pump of the Fiat Punto 1.1. First of all, we remove…
How to Remove the Fuel Pump from a Fiat Punto
How to Remove the Fuel Pump from a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Before you can start, you need to enter the cabin of your Fiat Punto. Begin by removing the rear seat bench by unscrewing the relevant fixing bolts, …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos