Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt of the Fiat Ducato 2.2

Model: Fiat Ducato X290 - Years 2014-2026
Part: Timing belt

The main steps outlined below will show us how to disassemble and replace the timing belt of the Fiat Ducato 2.2. First, we open the hood of the vehicle and begin by removing the upper timing cover, then also removing the engine support; we lift the vehicle and proceed to remove the V-belt and the crankshaft pulley, removing the lower timing cover as shown in the video. At this point, we take the necessary references for the replacement of the belt, installing the new original one and replacing the water pump kit if necessary.

Posted on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

When to replace the timing belt of the Fiat Ducato 2.3 Multijet
When to replace the timing belt of the Fiat Ducato 2.3 Multijet
Fiat Ducato (2006-2014 / X250) Today's guide will provide us with the main information on how and when to dismantle and replace the timing belt of the Fiat Ducato 2.3 Multijet; typ…
How to replace the timing belt of the Fiat Ducato.
How to replace the timing belt of the Fiat Ducato.
Fiat Ducato (1993-2016 / MK 2) The timing belt of the Fiat Ducato 2.8 is located inside the front hood, specifically near the engine and the cylinder heads. In case it is necessary…
Guide to replacing the timing belt of the Fiat Ducato
Fiat Ducato (1993-2016 / MK 2) Today's instructions will allow us to disassemble and replace the timing belt of the Fiat Ducato. First, we lift the vehicle and start by removing th…

Other guides you may be interested in

How to Remove the Spare Wheel in a 2007 Peugeot Boxer?

We are all used to finding the spare wheel in the boot of our car, beneath the cover. But where is it in vans? Unlike cars, the spare wheel is not immediately accessible, and it requires some patience to free (or remove) it from its location. In the video, you can see the exact location of the spare wheel in the Peugeot Boxer van. Once you have located it, you can extract it using the appropriate key. Now that the wheel is on the ground, simply remove the metal lock and fit it in place of the flat tyre.

Watch the video!


by ScegliAuto

More videos