Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the LED on the glove compartment of the Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Light bulb

In this video, we see how to replace the LED bulb located in the storage compartment in front of the gear shift of a Fiat Tipo: we remove the front panel, perhaps using a plastic spatula to pry it off and then pulling it towards us, and then we remove the electrical connectors found behind it. We insert our hand inside and push the plastic partition located above, where the LED we intend to replace is located. We remove the circuit where the LED is mounted, which we can replace by desoldering it from the board. Then we reinsert it into its housing. We put the board back in place and then reconnect the electrical connectors to the front panel we had previously removed, and put it back in place. And that's it.

Posted on 27 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Light Bulb on a Fiat Tipo
How to Replace the Interior Light Bulb on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Today you will learn how to replace the interior light bulb on your Fiat Tipo with an LED bulb. First, remove the cover of the bulb holder; it is cli…
How to Replace the Indicator Bulbs on a Fiat Tipo
How to Replace the Indicator Bulbs on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the side indicator bulbs on a Fiat Tipo with LED ones, start with a plastic tool (a card will also work as shown in the video) to gently l…
How to Remove the Pollen Filter on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In this video, we will see how to remove the pollen filter on a Fiat Tipo (new model). Open the glove compartment and detach the plastic guides (loca…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos