Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Bulbs on a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Side marker bulb

To replace the side indicator bulbs on a Fiat Tipo with LED ones, start with a plastic tool (a card will also work as shown in the video) to gently lever the right side of the light unit to remove it; once the indicator light unit is removed, twist the bulb holder slightly to extract it and disconnect the bulb by simply pulling it out; after removing the bulb, insert the connector for the LED into the bulb holder and test the LED's correct operation without inserting it; once the operation is confirmed, smooth the hook of the indicator so that when you fit it, it does not break due to the limited space. Perform the same operation on the other side of the car.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "TPMS" Light on a Fiat Tipo
How to Reset the "TPMS" Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Before you start, check and, if necessary, adjust the pressure in the tyres, then sit in the driver's seat of your Fiat Tipo. Start the engine. Next,…
How to Replace the Remote Battery of the Fiat Tipo?
How to Replace the Remote Battery of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the remote battery of the Fiat Tipo, lift the emergency key from the device to leverage it in its housing. This will allow you to remove t…
How to Replace the Spark Plugs on a Fiat Tipo?
How to Replace the Spark Plugs on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the spark plugs on a Fiat Tipo, open the bonnet to access the components located within the engine bay: here, you will need to remove the …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos