Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulbs on a Fiat Tipo?

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Light bulb

The fog light bulbs on a Fiat Tipo are located in a specific compartment accessible from the underside of the vehicle. As shown, to replace these bulbs, remove the cover beneath the splash guard on the front wheel arch. First, remove the push screw and then press on the two clips. Once this cover is removed, you can access the electrical connector that needs to be disconnected. Now, simply pull out the H11 fog light bulb and replace it with a new one. If the cable is too long, secure it with a tie wrap as demonstrated by the YouTuber.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fog Light Bulbs in the Fiat Tipo
How to Replace the Fog Light Bulbs in the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In today's video, learn how to replace the fog light bulbs in the Fiat Tipo. You will need H1 bulbs; you may also consider replacing them with LED bu…
How to remove the rear light and bulbs of the Fiat Tipo
How to remove the rear light and bulbs of the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In this brief and simple guide, you will learn the steps to remove and replace the rear light and its bulbs on the Fiat Tipo. First, open the boot li…
How to Replace the Number Plate Lights on the Fiat Tipo
How to Replace the Number Plate Lights on the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Let’s discover in this short and simple guide how to remove and replace the number plate bulbs on the Fiat Tipo. First, move to the rear of the vehic…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos