Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Tipo
    4. : How to replace the fog light bulbs in the Fiat Tipo

Fiat Tipo - Video tutorial

Model: Fiat Tipo 358, 357, 356 - Years 2016-2023
Part: Fog lights
Operation: How to replace the fog light bulbs in the Fiat Tipo

In today's video we see how to replace the fog light bulbs in the Fiat Tipo. The type of bulb you will need to equip yourself with is the H1; you can eventually consider replacing them with led bulbs, equipped with resistance and cooling fan. We identify which one I will intervene on; we rotate the wheels in the opposite direction. Now, with a screwdriver, we extract the plastic flap that hides the headlights. We disconnect the power connector and extract the bulb from its seat. We proceed with the replacement and reassemble everything following the previous steps. Operation completed.


Posted on 21 April 2024 by ScegliAuto



How to replace the fog light bulbs on the Fiat Tipo?
Fiat Tipo (2016-2023 / 358, 357, 356) The Fiat Tipo fog light bulbs are located in a special compartment accessible from the underside of the vehicle. As the author shows us, to replace t
How to remove the rear light and bulbs of the Fiat Tipo
Fiat Tipo (2016-2023 / 358, 357, 356) Today we will see, in this short and simple guide, the steps that will allow us to disassemble and replace the rear light and its bulbs of the Fiat T
How to remove the rear light bulb of the Fiat Tipo 356-357
Fiat Tipo (2016-2023 / 358, 357, 356) Let's see in this guide how to remove and replace the rear light bulbs of the Fiat Tipo second series, version 356 and 357. First we open the tailgat

Other guides that may interest you

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos