Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter on the Fiat Scudo

Model: Fiat Scudo MK 3 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

See other generations:
Video tutorial

In this video, we see how to replace the cabin air filter of the Fiat Scudo: it is replaced from the engine compartment, and we must start by removing the two 10mm screws located on the sides of the engine air intake, then we disassemble the engine air intake tube from its housing, which we will remove by unscrewing the two screws of the metal plate.

By removing the plastic housing, behind it we find the cabin filter, arranged horizontally.

We remove it, clean the container from dust and residues, and replace the filter with a new and clean one, paying attention to the installation direction. Now we put the plate back in place and screw back the screws that held it in place, reassemble the tube and the two side screws previously removed.

Job done.


Posted on 12 July 2025 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Fiat Scudo
How to replace the cabin air filter of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) If you want to independently replace the air filter located in the cabin of your Fiat Scudo, you just need to read the following guide and put into p…
How to Replace the Air Filter on a Fiat Scudo
How to Replace the Air Filter on a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Learn how to replace the engine air filter on a Fiat Scudo. Open the car door, pull up the lever to open the engine compartment located at the bottom…
How to Replace the Pollen Filter on Fiat Scudo
How to Replace the Pollen Filter on Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Does the cabin air filter need replacing? Here’s how to remove it from a Fiat Scudo. Lift the front bonnet, remove the plastic cover under the front …

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos